Fire-magic Echelon Insulating Liner User Manual download pdf

INSTALLER: Leave these instructions with consumer.

CONSUMER: Retain for future reference.

IMPORTANT INFORMATION & TECHNICAL DATA

Read these instructions and the safety and installation portions of the grill instructions before liner installation.

The insulating liner kit includes the pre-assembled liner, two support hangers, and a heat shield. Liner

cutout dimensions are given in Table 1. A nominal

" gap around the back and sides of the liner is

recommended for ease of installation. A minimum of 5" from combustible material is required directly

below the top of the support hangers/Stud A, to allow for clearance of the heat shield (See Fig. 2-2). If

a complete combustible shelf is installed beneath the heatshield, it must contain two ventilation cutouts.

The cutouts must be located directly below the right hand and left hand ends of the heatshield. Reference

Table 2 for dimensions. If the countertop thickness exceeds 2", new screw holes must be made in the

support hangers.

Countertops and cabinet faces made of combustible material, such as wood, Formica, and Corian, can

extend up against the outside walls of the insulating liner and be joined by a bead of silicone sealer rated

for 400° or higher, as shown in Fig. 3-1. Never build over the insulating liner with combustible materials, as

this will interfere with the grill hanger.

The cabinet base must include 100 sq. in. of ventilation within 12" of the ﬂ oor. Refer to the grill safety

precautions and installation instructions for additional propane gas venting requirements (if applicable).

Replacement parts may be obtained from your nearest Robert H. Peterson Co. dealer. For assistance in

locating a dealer, you may contact the factory at the address listed below.

ROBERT H. PETERSON CO. • 14724 East Proctor Avenue, City of Industry, CA 91746

REV 8 - 1302051115

L-C2-240

ECHELON INSULATING

LINER INSTRUCTIONS

Grill

series

Liner

Model

Height Width Depth

E660i 3176-50 12" 36

" 26"

E790i 3186-50 12" 42

" 26"

E1060i 3185-50 12" 55" 26"

Table 1 - Enclosure cutout dimensions (for liner)

Grill series Width Depth

E660i 4

" 16

E790i 4

" 16

E1060i 4

" 16

Table 2 - Combustible shelf cutout dimensions

1 2 3 4

Summary of Contents

Page 1 - LINER INSTRUCTIONS

1INSTALLER: Leave these instructions with consumer.CONSUMER: Retain for future reference.IMPORTANT INFORMATION & TECHNICAL DATARead these instruct

Page 2 - INSTALLATION

2IMPORTANT INFORMATION & TECHNICAL DATA (cont.)YPenciled linesXFrontSupport hanger (2)Fig. 2-1 Interior Side ViewCountertopStud ASupport hangers a

Page 3 - INSTALLATION (cont.)

3Refer to the grill safety precautions and installation instructions to install the grill.For Echelon E1060i units with the powerhood op-tion shift th

Page 4 - NOTES PAGE

4NOTES PAGEPlease use this page to record any information about your liner that you may want to have at hand.REV 8 - 1302051115L-C2-240

Comments to this Manuals

No comments

Fire-magic Echelon Insulating Liner User Manual

Browse online or download User Manual for Grills Fire-magic Echelon Insulating Liner. Fire Magic Echelon Insulating Liner User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Grills Fire-magic Echelon Insulating Liner